CONDENSATION CONTROL
Monoglass® Spray-On combined with proper ventilation prevents condensation on the internal face of a structure by maintaining the temperature of the air on the internal face, nearer to that of the air temperature in the rest of the building.
Monoglass provides this protection particularly well on metal buildings and buildings with similar exposed projections on the inside wall, which can be sprayed in conjunction with the exterior cladding, providing a monolithic thermal barrier.
|
K-Value:
R-Value: |
0.25(BTU inch/(ft2hrºF)
4.00 (ft2hrºF)/BTU inch |
|
KSI:
RSI: |
0.036 W/(mºC)
27.7 Km2/Wm |
|
Moisture Absorption per CGSB 51-GP-36P:
Maximum allowable 20%, Monoglass Result: 4.9%
|
|
Fungus and Bacterial Resistance per ASTM G-21-90:
Result: Monoglass received a “zero growth” rating.
|
Monoglass Spray-On was used to replace hazardous asbestos on B.C. Hydro & Power Authority pumping and metering stations, providing high thermal value, condensation control and noise abatement without fire or health hazard.
|
COLD AND FREEZING CLIMATES
REQUIRE SPECIAL CONSIDERATIONS
When considering an interior insulation for a heated building, where no vapour barrier will be used on the warm side of the insulation, consult with a local HVAC professional to determine what amount of insulation is appropriate for your building to avoid possible formation of a dew point inside the insulation.
Please contact us for further information, precautions and considerations.
|
